Menu
Menu
FRAD is a combination of two adjustment systems.
A. Automatic die lip gap adjustment.
B. Electronic adjustment of all thermal bolts to automatically adjust the die lip gap upto 2 mm.
C. Automatic thickness profile controlling of the extruded films and sheets.
FRAD is extrusion die conversion kits for extrusion die OEM’s and end users with existing manual dies.
Applications include:
Flat Extrusion Dies for Film and Sheet (PP, PE, PET, PVC, PS, HIPS, ABS etc..) Extrusion Coating & Lamination Dies BOPP and BOPET Dies
Cast Film Dies.
With the automatic system FRAD, the lip can be moved with its entire flexible range. The thickness profile control continues to be done with the thermal bolt. The lip gap can also be adjusted according to the film thickness and quality during production or adjusted during production change without having to turn off the extrusion line.
| Technical Specifications | FRAD |
|---|---|
| total adjustment range | 2 mm |
| division (bolt spacing) | 30 |
| performance heating cartridge | 80 W |
| push elements | |
| mechanical fine adjustment (0,5 mm/rev) | |
| thermal separation to extrusion die | |
Our experts are always available for your inquiries and technical consultation. Please contact us anytime at our HQ or refer to local SBI Mechatronik representatives in your country!
Johannes will develop a fitting solution for your requirements based on our products and services.
j.scherleitner@dev.sbi-mechatronik.com
tel. +43 (0) 2952 50701
Roman is your expert for technical questions, application development and custom solutions.
r.geist@dev.sbi-mechatronik.com
tel. +43 (0) 2952 50701
SBI Mechatronik GmbH
Tel.: +43 295250701
Kaplanstraße 12
2020 Hollabrunn – Austria
